Express - Battery Installation

Libra Express uses either a 1.5V or a 3.6V AA lithium battery. For maximum battery life, use a 3.6V battery.

1. Remove the lid of the Libra Express device. 
2. For first-time operation, remove the insulator pull-tab. 
3. Ensure that the battery is well seated with correct polarity.
4. Secure the lid, tightening the screws completely. 

An LED light will light up and blink once every 10 seconds. At this point, the device is ready to pair. Contact your dealer or visit our website for replacement batteries. 12V power cables are also available from Agrimatics for continuous power, eliminating the need for batteries (M0051 models only). When on 12V power the Libra Cart will use the internal battery as a backup power supply.