TMR - Can't Pair

See Pairing for instructions. If unsuccessful, ensure each of the following: 

  1. The app is running the latest version from the Apple App Store.
  2. You are attempting to pair from the Mixers tab of the Libra TMR app and not the general tablet/smartphone Bluetooth settings. 
  3. Bluetooth is enabled on the mobile device.
  4. Primary Display is selected in the Settings tab when pairing the main mobile device. If attempting to pair a remote display, ensure that the primary display is already paired and communicating. 
  5. There are no other mobile devices paired to the Libra TMR device as the primary display.
  6. The device isn't already listed and paired in the Mixers tab of the app. If it reads Tap to Pair, tap to reconnect. 
  7. The battery inside the TMR device is well seated with correct polarity and does not need replacing. Next to the battery terminal on the circuit board, a small green light will flash once every 10 seconds if the Libra TMR device is getting power. If using the power cable, inspect the cable and ensure it is secured to the Libra TMR device.
  8. There is no moisture or corrosion on the circuit board inside the Libra TMR device.

If pairing is still unsuccessful, try the following:

  1. Completely close and reopen the app. 
  2. Turn Bluetooth off and then on on the mobile device (under general Bluetooth settings). 
  3. Turn airplane mode on and then off on the mobile device. 
  4. Restart the mobile device. 
  5. Remove the battery, wait a full 60 seconds and then reinsert. 
  6. Try another compatible mobile device. 

For additional help the video tutorial below will show this process in-app:

Related Articles