Harvest - Pairing the Remote Display
The remote display feature enables an unlimited amount of users to monitor live weights while within the range of the Libra Cart device. It is commonly used for yield monitor calibration in the combine. While in this mode, the processing and viewing of harvest data are limited, unless the Pro version of the cloud service is utilized and the device is connected to the internet. Remote displays operate only while the primary display is connected.
Pairing is done directly through the Libra Harvest app and NOT through the general smartphone/tablet Bluetooth settings.
- Ensure Bluetooth is enabled on your mobile device.
- Bring the mobile device to the Libra Cart device and launch the Libra Harvest app.
- Select the Settings tab inside the app. For the tractor's mobile device, ensure Remote Display is selected. Pairing a remote display should only be done AFTER the primary display has been paired.
- Tap Add Grain Cart to add your new Libra Cart device to the app, and wait for the scan to finish.
- Select your Libra Cart device from the list.
- Provide a name for the cart, choose the desired weight display format (e.g., 10 lb, 20 lb), and tap Add+ to finish.
- Your device will now appear under "grain carts" with a check mark, indicating successful pairing.