Harvest - Manually Starting an Unload
The Libra Cart system will automatically detect grain cart unloads that are above the set minimum load. Manual unloads can be started for unloading weights smaller than the minimum load or if preferred to automatic detection.
Tap Unload on the Display tab to view and select from a list of options (Fill to Max GVW, Fill to Net Amount, Add Amount, Empty Cart), enter a target amount if prompted, unload, and tap Save.
Save may optionally be used at anytime to finish and save any transaction, whether automatically detected or started manually. To use the system exclusively in manual mode, turn off Unload Detection in the Settings tab by tapping the gear icon next to the name of the grain cart.
Fill to Max GVW (only available if a truck is selected)
Fill to Max Gross Vehicle Weight fills the selected truck from a grain cart until its configured maximum gross vehicle weight is met. The upper display shows the net amount loaded into the truck so far. The lower display shows the balance of weight yet to be unloaded.
1. Tap Unload from the Display tab.
2. Select Fill to Max GVW.
3. Unload any amount into the truck.
4. Tap Save when load is finished.
Fill to Net Amount (only available if a truck is selected)
Fill to Net Amount fills the selected truck to a target net amount (weight of grain) that you enter. The target must be higher than the current net amount in the truck you are loading. The upper display shows the net amount loaded into the truck so far. The lower display shows the balance of weight yet to be unloaded.
1. Tap Unload from the Display tab.
2. Select Fill to Net Amount.
3. Enter payload target weight.
4. Unload any amount into the truck.
5. Tap Save when load is finished.
Add Amount
Add Amount allows you to add a specific target weight to unload.
1. Tap Unload from the Display tab.
2. Select Add Amount.
3. Enter the target amount.
5. Tap Save when load is finished.
Empty Cart
Unload any amount of weight from the cart. This is the default behaviour of the Libra Harvest app.
1. Tap Unload from the Display tab.
2. Select Empty Cart.
3. Unload any amount into the truck.
4. Tap Save when load is finished.