Serial Link - Pairing / Un-pairing Serial link (Feed)

Pairing is done directly through the Libra Feed app and NOT through the general smartphone/tablet Bluetooth settings.

If you have already paired a mixer to your app:

  1. Ensure Bluetooth is enabled on your mobile device.
  2. Bring your mobile device to the Serial Link device and launch the Libra Feed app.
  3. Select the Mixers tab inside the app. For the mixer's mobile device, ensure Primary Display is selected.
  4. Tap the name of the desired mixer, then tap the Tap to Pair button under Scoreboard Device and wait for the scan to finish.
  5. Once the scan has successfully completed, the LED on the device will start to flash twice and a link icon will appear above the "Clear" button on the Display tab if you have an active connection.

If you have not paired a mixer to your app:

  1. Ensure Bluetooth is enabled on your mobile device.
  2. Bring your mobile device to the Libra Feed and Serial Link devices and launch the Libra Feed app.
  3. Select the Mixers tab inside the app. For the mixer's mobile device, ensure Primary Display is selected.
  4. Tap the + sign in the top right to add your new Libra Feed device to the app, and wait for the scan to finish.
  5. Once the scan is finished and your device has been successfully found; provide a name for the mixer and choose the desired weight display rounding (e.g., 10 lb, 20 lb).
  6. After the mixer is paired, tap the Tap to Pair button under Scoreboard Device and wait for the scan to finish.
  7. Once the scan has successfully completed, the LED on the Serial Link will start to flash twice and a link icon will appear in the bottom left corner on the Display tab if you have an active connection.

Disconnecting a paired Serial Link

  1. Navigate to the Mixers tab
  2. Tap the name of the mixer you wish to disconnect from.
  3. Under Scoreboard Device, tap the "scoreboard Device Paired" message. This will bring up the option to pair a new device directly or delete the existing connection. To pair to a new Serial Link device, tap Pair New. To remove the current pairing, tap Delete.

Note: Your scoreboard will turn off when you close the Libra Feed app or disconnect your Serial Link.