Plant - Remote Mode Bushel Display is Incorrect

If the bushels on a Remote display are significantly different then those of the ones on the connected Primary, it is most likely that the Remote device has a crop selected that has a different test weight than the Primary. With it most likely being on a the "Default" crop. The Libra Plant app will look for a product's test weight in this order: current Equipment > current Source > current Field.

To get the Remote device showing the correct amount of bushels, a good fix is to create a Location or Field for commonly used Products.

Using Sources to Select bu Display Value

During Location creation, name the Location something like, "Remote view - (product name)" and set its commodity to the desired Product. A vendor purchase of at least 1 unit of that commodity will need to be added to that Location to set its active Product. Then the Source selector on the Display tab can be used to quickly swap Sources for appropriate bushel readouts.

Using Fields to select bu display value

During Field creation, name the Field something like, "Remote view - (product name)" and set its commodity to the desired Product. Then the Field selector on the Display tab can be used to quickly swap Fields for appropriate bushel readouts.

Remote devices connected to an account with a Pro license will have access to Locations, Equipment, and Fields in the account and can select the current Location or Field from either the Display tab or Fields menu to match the Primary display (every mobile device enabled for syncing needs a Pro license).