Harvest - M0018 Serial Configuration

Model M0018 Libra Carts have built-in Serial communication capability, allowing it to communicate to accessories, such as a scoreboard display or John Deere Grain Harvest Weight Sharing. Previous Libra Cart models require our Serial Link hardware to connect to those features.

Note: 12V power is required for scoreboard displays to be powered through M0018 hardware and is strongly recommended for all other accessories.

Configuration:

1. Ensure the M0018  is paired as the Primary Device.
2. Head to the Devices tab.
3. Under the Weight Device section, find the Serial Configuration settings dropdown menu. Tap the dropdown to access the Serial settings for the connected M0018 unit.
4. If a scoreboard is connected to the M0018 through the AUX connector, ensure the Data Type settings is set to "Scoreboard". If using the Serial for John Deere Grain Harvest Weight Sharing, set it to "Data".
5. The Weight Unit and Display Rounding settings can be set to your preference at any time.
6. Settings will be saved automatically when selected.