Harvest - Device Installation / Mounting

To mount the Libra Cart device, it is recommended that it be installed on the front of the grain cart with its connectors pointing downward, preferably protected from direct exposure to the elements. Optionally, you can leave the Libra Cart device in the grain cart tractor. Connect the cart’s load cell junction box cable to the device. Secure any excess cable. 

12 - Volt Powering Options (Model M0014 and M0016)

If you have a 12-volt vehicle power cable, you can connect it to the device’s power connector. Secure any excess cable. If not, cover the unused power connector with the supplied cap. WARNING: Vehicle battery connection shall be in accordance with all vehicle safety instructions including 4A SLOW ACTING protective fusing with minimum 20 AWG wiring.