Plant - Pairing the Primary Display

The Primary display stores and displays all of your planting data. Only one mobile device can be the Primary display, which should be the device in the tractor cab attached to the planting equipment.

Pairing is done directly through the Libra Plant app and NOT through the general smartphone/tablet Bluetooth settings.

1. Ensure Bluetooth is enabled on your mobile device.
2. Bring the mobile device to the Libra Plant device and launch the Libra Plant app.
3. Select the Settings tab inside the app. For the tractor's mobile device, ensure Primary Display is selected. Pairing a Remote display should only be done after the Primary display has been paired.
4. Tap Add Libra to add your new Libra Plant device to the app, and wait for the scan to finish.
5. Select your Libra Plant device from the list.
6. Provide a name for the equipment, select Equipment Type (Planter for planters, spreaders, drills, etc. or Tender for seed tenders), choose the desired weight display format (e.g. 10 lb, 20 lb), and tap Add+ to finish.
7. Your device will now appear under "Libra Equipment" with a check mark, indicating successful pairing.