Plant - Pairing the Remote Display
The remote display feature enables an unlimited amount of users to monitor live weights while within the range of the Libra Plant device. While in this mode, the processing and viewing of planting data are limited, unless the Pro version of the cloud service is utilized and the device is connected to the internet. Remote displays operate only while the primary display is connected.
Pairing is done directly through the Libra Plant app and NOT through the general smartphone/tablet Bluetooth settings.
- Ensure Bluetooth is enabled on your mobile device.
- Bring the mobile device to the Libra Plant device and launch the Libra Plant app.
- Select the Settings tab inside the app. Ensure Remote Display is selected. Pairing a remote display should only be done after the primary display has been paired.
- Tap Add Libra to add your new Libra Plant device to the app, and wait for the scan to finish.
- Select your Libra Plant device from the list.
- Provide a name for the equipment, choose the desired weight display format (e.g. 10 lb, 20 lb), and tap Add+ to finish.
- Your device will now appear under "Libra Equipment" with a check mark, indicating successful pairing.