Plant - Device Installation / Mounting

To mount the Libra Plant device, it is recommended that it be installed on the front of the equipment, with a clear line of sight to the Primary Display, and its connectors pointing downward, preferably protected from direct exposure to the elements. Connect the equipment’s load cell junction box cable(s) to the device. If the second weight channel is not being used, cover it with the supplied cap. Secure any excess cable. 

12 - Volt Powering Options

If you have a 12-volt vehicle power cable, you can connect it to the device’s power connector. Secure any excess cable. If not, cover the unused power connector with the supplied cap. WARNING: Vehicle battery connection shall be in accordance with all vehicle safety instructions including 4A SLOW ACTING protective fusing with minimum 20 AWG wiring.