Plant - Manually Starting a Load (Planter Mode)
While connected in planter mode, the Libra Plant system will automatically detect container loadings. Manual loads can be started for loading weights smaller than the minimum load or if preferred to automatic detection.
Tap Load on the Display tab to view and select from a list of options (Load, Add Amount), enter a target amount if prompted, load, and tap Save.
Save may optionally be used at anytime to finish and save any transaction, whether automatically detected or started manually. To use the system exclusively in manual mode, turn off Unload Detection in the Settings tab by tapping the gear icon next to the name of the equipment.
Add Amount
Add Amount allows you to add a specific target weight to load.
1. Tap Load from the Display tab.
2. Select Add Amount.
3. Enter the target amount.
5. Tap Save when load is finished.
Load
Load any amount of weight into container(s). This is the default behaviour of the Libra Plant app in Planter mode.
1. Tap Load from the Display tab.
2. Select Load then select a container to load into.
3. Load any amount into the container.
4. Tap Save when load is finished.